Assembly Instructions
HOW TO ADJUST THE SEAT
Page 11
Spring Loaded Knob Operation
Turn knob counter-clockwise three times.
Pull knob outward and adjust bottom frame
simultaneously.
Push knob back inward until it clicks and then
tighten it by turning clockwise.
The
Knob (#30)
comes pre-assembled on the unit and serves to
enhance its safety and stability. No installation or adjustments are
necessary.
Stability Knob
The
Spring Loaded Knob (#28)
has a safety feature that allows you to loosen it by turning it counter
-clockwise and then pull upward (to allow for adjusting). Remove the
Knob Bolt (#29)
, adjust the seat distance
and then release the
Spring Loaded Knob (#28)
back. Making sure it engages through a hole on the
Bottom Frame (#02).
Tighten the
Spring Loaded Knob (#28)
by turning clockwise, and then tighten the
Knob Bolt (#29).
For the user’s safety, always ensure the
Spring Loaded Knob (#28)
on the
Bottom Frame (#02).
(Note: For users shorter in height, slide the
Bottom Frame (#02)
deeper into the
Main Frame (#01),
and
farther out for taller users.)
The assembly process is now complete. However, for your own safety, please make sure to read this entire
Owner’s Manual which includes safety instructions and warnings, as well as any safety /warning labels
affixed to the product before use. For your safety, please visually and functionally inspect and test the unit
after assembly is complete.
SJ-3560
