Page 5 of 15
Before You Begin
Ensure that system and all components are un-damaged and complete. Please contact your
distributor immediately if you are unsure.
The UV system is designed to be mounted either vertically or horizontally at the point of use.
Ideal installation is vertical with the lamp connector on top. This is to prevent water damage
from occurring on the lamp pins and connector.
The ballast should be mounted horizontally either above or beside the chamber to prevent
moisture from running down the cord and causing a potential fire hazard.
Always wear gloves when handling the lamp or quartz sleeve.
NEVER look directly at the UV light. Always wear UV rated eye protection if you must
look at it. Always wear protective clothing.
How a UV System Works
