PAGE 2
SUCTION HAZARD - When using the pool cleaner, keep it away from body parts
when the cleaner is connected to suction.
CHILD DROWNING RISK - Adult use only. Never allow children to use the
pool cleaner. Do not allow swimmers in the pool during cleaner operation. Store
out of the reach of children.
Before you assemble and install your pool cleaner, we strongly recommend you carry out the
following steps to ensure your pool is ready for your cleaner to operate.
1.
Make sure the chemical balance of your pool water is correct.
2.
Brush your pool and let any debris settle.
3.
Vacuum your pool, using a manual vacuum cleaner.
4.
Clean your pool filter, skimmer basket and pump strainer basket.
5.
Close the pool main drain. (If your pool has one.)
6.
Adjust the pool return lines so the water flow is directed downward to ensure complete
cleaning of your pool. The flow of water from the return line(s) can affect the
performance of pool cleaner, as it can push the cleaner away from certain areas, or
cause it to stay in one section of the pool. To turn the flow downward simply:
• Loosen the lock ring.
•Turn the eyeball, so the flow is directed downward.
• Retighten the lock ring.
7. If necessary, replace the eyeball fitting with the Return Line Diverter supplied with your
pool cleaner. To do so, simply:
•
Make sure the pool pump is switched off.
•
Unscrew the lock ring.
•
Replace the original eyeball with the Return Line Diverter.
•Make sure the Return Line Diverter is positioned so as to direct the flow downwards.
!
WARNING
SAFETY INSTRUCTIONS
: -
Read P rior to Us e
PREPARING YOUR POOL
