Figure9
PAGE 5
STEP 5: CONNECTING & USING THE FLOW CONTROL VALVE
The Flow Control Valve ensures your pool cleaner receives the flow required to ensure
optimum performance.
•Make sure the pool pump is turned OFF.
•Expel all the air from the hose.
•Attach Flow Control Valve to the male hose
(smaller end). See Fig 7.
•Insert the Flow Control Valve into the
Weir/Skimmer. If necessary, use the Control
Valve Adaptor to ensure a good connection.
See Fig 8.
•Turn the pool pump ON.
•Your pool cleaner will now begin randomly and
automatically vacuuming your pool.
Figure 7
Attach Male Hose
Adaptor (smaller
end)
Flow Control
Valve
Control Valve
Adaptor
The Flow Control Valve is preset between
positions 3-4. This provides the ideal
operating flow in most pools But if
necessary the flow can be adjusted by
using any setting from Position 1 through
6(1= minimum flow, to slow your cleaner
down 6 = maximum flow, your cleaner will
run faster).See Fig 9.
Top of Skimmer
Figure 8
Hose through
Skimmer
Opening
Control Valve
Adaptor
Flow Control Valve
Attach
Hose This
End
Press into bottom
of skimmer