background image

 

 

- 13 - 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

Typical display layout for option selection: 

The radio button for selecting the units (°C/°F) 
 
 

|

  - Radio button style for de-selected item 

   

€

  - Radio button style for selected item 

 
Procedure: 
 
1) Use 

S

 or 

T

 key in order to select the desired option  

2) Use 

f

 key to activate the selected option 

 
For leaving this option: 
 
1) Use the 

e

 key to go back to the last menu level without  

    activating the selected option 

Item 1 of 2 

 
    Back 

   
  Enter 

Example: Time and date setting 
 
1) Use 

S

 and 

T

 key to adjust the time 

 
2) Use 

f

 key to move from HOUR to MINUTE to  

    SECOND 
 
3) After the SECOND setting press the 

f

 key to finalize  

    and store the setup or press 

e

 to exit from the "Time  

    and date setting" menu and without saving the new  
    setting 

Typical display layout for altering or adjusting the number setting: 

Time and date setting 
 hh mm 

ss 

 

 

 

23  :  00  :  59

 > 

 

 

 

Enter 

Back 

Summary of Contents for DS 300 mobile version

























Reviews: