CS Instruments DS 300 mobile version, Instruction Manual

- 15 - 

The operation in detail 

 
By means of the "Enter" key the menu can be accessed. DS 300 mobile version has 
the following main menus: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Logger operation 

 
 
DS 300 includes a data logger. In order to configure the logger function and to 
activate/deactivate it there are several functions available: 

Measuring rate 

Set logging rate and averaging option

The logging rate defines the interval data should be recorded in 
the memory. It will record from every activated channel a 
sample. The averaging option can be used to calculate an 
average value. I.e. DS 300 is measuring every 1 second and if 
the logging rate is 10 seconds, it will calculate an average value 
out of the last 10 measurement values and store it as a 
recorded sample. 

Manual start 

Start/stop logging 

Starts or stops the data recording. Whenever a new recording is 
started a new file is created in the memory. 

Select logging  
channels 

Select those channels which should be recorded in a file. 
Channels which are not selected are not stored. The selection 
is effected by placing a checkmark. 

Set logger memory  
mode 

There are following possibilities: 
1. "Wrap aound mode" - if the memory is full the first measured 
    values will be overwritten. 
2. "Stop if the memory is full" 

Show logger  
memory 

Shows the status and the size of the available memory 

 
Logger operation 
 
Sensor settings 
 
System status and settings 
 
                    Page 1 of 2 

Back 

Enter