background image

 

 

- 20 - 

 

 

14.  Order information 
 

Description 

Order no. 

DS 300-P2 mobile version with data logger for 1 million measured values including 2 
digital inputs, 

without

 analogue inputs, in a robust case 

0500 3101 

DS 300-P4 mobile version with data logger for 1 million measured values including 2 
digital inputs and 2 analogue inputs, in a robust case 

0500 3225 

DS 300-P6 mobile version with data logger for 1 million measured values including 2 
digital inputs and 4 analogue inputs, in a robust case 

0500 3226 

Consumption sensor VA 400, max. version (185 m/s), length 220 mm including 5 m 
cable and certificate 

0695 0122 

HighSpeed version of consumption sensor (224 m/s) 

Z695 4002 

Sensor length 300 mm 

ZSL 0300 

Sensor length 400 mm 

ZSL 0400 

Special version for oxygen measurement 

3200 0010 

FA 410 dew point sensor, -80…+20 °Ctd incl. mobile meas. chamber and 5 m cable 

0699 0411 

Standard measuring chamber up to 16 bar 

0699 3390 

Measuring chamber for granulate driers for minimum over pressure 

0699 3490 

Precision pressure sensor CS 16 (0…16 bar) accuracy < 0.5 % * 

0694 3555 

Precision pressure sensor CS 40 (0…40 bar) accuracy < 0.5 % * 

0694 3930 

Precision pressure sensor CS 1.6 absolute  (0…1.6 bar absolute) accuracy < 0.5 % * 

0694 3550 

Precision pressure sensor CS 16 (0…16 bar) accuracy < 1 % * 

0694 1886 

Precision pressure sensor CS 40 (0…40 bar) accuracy < 1 % * 

0694 0356 

Precision pressure sensor CS 1.6 absolute (0…1.6 bar absolute) accuracy < 1 % * 

0694 3551 

Clamp-on ammeter 0…1000 A AC incl. 5 m connection cable with ODU plug 

0554 0504 

Screw-in temperature probe Pt100, Class A, length 300 mm, -50…+500 °C * 

0693 0002 

Temperature probe cable Pt100, Class A, length 150 mm 

0604 0102 

Temperature probe cable Pt100, Class A, length 300 mm 

0604 0100 

Clamp screwing 6 mm, G 1/2", PTFE clamping ring, pressure-tight up to 6 bar 

0554 6003 

Clamp screwing 6 mm, G 1/2", VA clamping ring, pressure-tight up to 10 bar 

0554 6004 

Connection cables: 

 

Connection cable for VA/FA Series 400 5 m with ODU plug 

0553.0111 

Connection cable for probes 5 m with ODU plug (for pressure sensors and 
temperature probes) 

0553.0110 

Extension cable 5 m for DS 300 mobile version with ODU plug 

0553.0103 

Software

 

CS Soft Professional, data evaluation in graphic and table form with USB cable 

0554 7010 

CS Analysis Software for leakage and cost calculation including CS Soft Professional 
software 

0599 2011 

Calibration of consumption/dew point sensors: 

 

Dew point: Precision calibration at -40 °Ctd incl. ISO certificate 

0699 3396 

Dew point: Precision calibration at 0°C and 10 °Ctd incl. ISO certificate 

3200 0003 

Consumption: 5-point precision calibration with ISO certificate 

3200 0001 

Real gas calibration 

auf Anfrage 

* Attention: Sensor without any connection cable! Please order connection cable separately. 

Summary of Contents for DS 300 mobile version

























Reviews: