CS Instruments DS 300 mobile version, Instruction Manual

- 5 - 

 
3.  Key features of DS 300 mobile version 

•

  Graphic display for easy user interface 

•

  Flexible power supply: 100…240 V AC/ 50…60Hz  resp. internal rechargeable battery 

•

  2 sensor inputs for CS consumption and dew point sensors (sensor connection 1 + 2) 

•

 USB 

interface 

•

  Data logger function for up to 1,000,000 values 

•

  PC software for easy configuration and evaluation of the data 

•

  Analogue input module (0…20 mA, 0…10 V, Pt100, Pt1000) (sensor connection 3, 4, 5 

and 6) 

4.  Calibration/adjustment 

At CS Instruments 

According to DIN ISO certification of the measuring instruments we recommend to calibrate 
and if applicable to adjust the instruments regularly at the manufacturer. The calibration 
intervals should comply with your internal specificaton. According to DIN ISO we recommend 
a calibration interval of one year for the instrument DS 300 including probes. 
 
 

5.  Safety instructions 

Observe measuring ranges of the sensors! 
 
Observe the admissible storage and transportation temperature as well as the 
permitted operating temperature (e. g. protect the instrument from direct 
insolation). 
 
The manufacturer cannot be held liable for any damage which occurs as a 
result of non-observance or non-compliance with these instructions. Should the 
device be tampered with in any matter other than a procedure which is 
described and specified in the manual, the warranty is cancelled and the 
manufacturer is exempt from liability. 
 
CS Instruments GmbH offers no gurantee for the suitability for any other 
purpose and is not liable for errors which may have slipped into this operation 
manual. CS Instruments GmbH is also not liable for consequential damage 
resulting from the delivery, capability or use of this device. 
 
We offer you to take back the instruments DS 300, which you would like to 
dispose of. 
 
Adjustments and calibrations should only be carried out by qualified employees 
from the measurement and control technology branch. 

!