- 8 -
7. DS 300 mobile version with FA 410 dew point sensor
Initiation
1. Connect dew point sensor FA 410 to channel 1 or 2
2. Switch on the instrument (DS 300 will recognize the dew point sensor FA 410
automatically)
3. The following parameters will be indicated: dew point in °Ctd, temperature in °C,
relative humidity in % RH
7.1 Technical data dew point sensor FA 410
Measuring range
-80 to 20 °Ctd
Pressure range
-1 to 50 bar standard
Accuracy
±
0.5 °Ctd (-10 to 50 °Ctd)
typical
±
2 °Ctd at -40 °Ctd
Operation temperature
-20 to 70 °C
Storage temperature
-40 to 80 °C
Screw-in thread
G1/2" stainless steel
3 measured value per
FA 410
Dew point in °Ctd, temperature in °C, relative humidity in
% RH
Please read carefully before starting the device!
1. Attention: Do not exceed pressure range of > 50 bar with standard version.
(Up to 350 bar in case of special version).
2. Important: Before installation briefly bleed the compressed air in order to remove
condensate and particles. This prevents soiling of FA 410. Standing air leads to
long measuring times.
Summary of Contents for DS 300 mobile version
Page 10: ...10 10 Survey operation menu with Enter one menu level down and return with Back...
Page 21: ...21 Notes...
Page 22: ...22 Notes...
Page 23: ...23 Notes...
