Cleaning
PI 500
Seite
90
von
93
11
Cleaning
Hinweis:
Note:
The PI 500 has a cleaning-function which protects the display against
unintentional operation in the event of cleaning measures. Please refer to
Chapterl 7.3.2.1.6
.
Cleaning of the PI 500 must be undertaken using a slightly damp (not wet) cotton cloth or one-way
wipe, and mild, commercially available cleaner/soap.
For decontamination, spray the cleaner on an unused cotton cloth or one-way wipe, and wipe the
component comprehensively. Perform the final drying with a clean cloth or by air drying.
In addition, the local hygiene provisions need to be observed.
Warning!
Damage possible!
A too high degree of humidity and hard and pointed objects, as well as
aggressive cleaners, cause damage to the data logger and to the integrated
electronic components.
Measures
•
Never clean with a soaked cloth.
•
Do not use aggressive cleaners.
•
Do not use pointed or hard objects for cleaning.
12
Battery
Warning!
Battery!
The replacement of the battery must only be carried out by authorised and
skilled personnel, and when the device is de-energised.
Only the original battery of the manufacturer with built-in protection circuit
may be used
Version: 10/11/2016, V1.04
