Device - Settings / Cleaning and System Status
PI 500
Seite
66
von
93
7.3.2.1.6 Cleaning
Main menu
Settings
Cleaning
7.3.2.1.7 System-Status
Main menu
Settings
System-Status
22.3 °C
7.83 V
5.05 V
5.01
10
7.3.2.1.8 About PI 500
Main menu
Settings
About DP 510
Brief description of the
Hardware
and
Software
Version
, as well as the
Serial Number
of
the PI 500.
Under options, you can buy two additional,
different functions, if you have not done this by
ordering.
This function can be used for cleaning the
touch panel during running measurements.
If one minute is not enough time to clean,
the process can be repeated at any time.
Is the cleaning faster finished, then you can
push the
“to abort press long”
button (for
one or two seconds) to cancel.
The function
System Status
offers an
overview, fitting voltages and currents on
the individual and the entire channel, as
well as the power supply of the power
supply unit.
By the
Runtime,
you always know how long
the PI 500 was in total in operation
