Channels
PI 500
Seite
73
von
93
7.3.2.4
Channels
Main menu
Channels
0.000 m³/h
648195 m³
0.000 m/s
Main menu
Channels
C1
Flw 1165.200 m³/h
Con 27366 m³
Vel 180.000 m/s
7.3.2.4.1 Min/Max Function
This feature allows to read out the minimum or maximum values of the current measurement for each
connected sensor. Start of recording is immediately after setting of the sensor, but there is always the
possibility to reset the Min and Max values.
Main menu
Channels
I1
↑
= Max-Wert
↓
= Min-Wert
The overview of
Channels
shows the current
measured values of all connected sensors.
Exceeds or falls below the set alarm limits, the
respective measured value flashes yellow
(
alarm 1
) or red (
alarm 2
).
.
Each channel can be selected and the settings
viewed and checked, but
no changes
can be
made here.
Remark:
Please, make changes in the
Settings
!
