Operation
VA 525 EN V1.01
page
21
o
41
Setup
Sensor Setup
Advanced
Ref. Settings
Ref.Pref
Setup
Sensor Setup
Advanced
Ref.
Settings
Ref.Temp
In order to change, e.g. the unit, first select by
pressing key
„
“
the field
“Units”
and then
key “
OK”
.
Select with the key
„
“
the correct unit and
then confirm selection by pressing 2x
„OK“
.
Input / change of the value by selecting the
respective position with button
„
“
and
entering by pressing button
„OK“
.
By pressing
„
“
the position value is
incremented by 1.
Complete with
„OK“
and
activate next number position.
Procedure for changing the reference
temperature is the same.
Unit selection:
according to chapter 10.3.1.3
Direct selection of the unit button and
call of the unit page with
„OK".
All changes have to be stored by pressing
„Save“.
With
„Default“.
the sensor is reset to
calibration settings.
