ENGLISH
2
1. SAFETY WARNINGS
Do NOT use fuels that are different from those instructed by the manufacturer.
DO NOT use any flammable liquid to light the boiler.
DO NOT light boiler if glass is damaged and do not, for any reason, open the fire box door while
operating.
Only clean the glass and painted parts with boiler cold, using a specific cleaning detergent, NOT
abrasive or corrosive, with a cotton cloth.
The machine must ONLY be installed by qualified personnel, certified in conformity with current
rules and regulations.
DO NOT unplug the stove if there are flames in the fire pot.
Take care when the boiler is functioning: the hot parts (glass, handle, etc...) they may cause burns.
Keep out of reach of children.
Remove power from the machine before any kind of maintenance or cleaning.
DO NOT place hands inside the tank during functioning.
Never throw unburnt pellets into the tank: it is a fire hazard.
Never throw pellets manually into the fire pot, especially if there are flames or hot ashes.
Unpleasant smells during functioning may be caused by the type of pellets used.
Possible noises during functioning are normal, caused by the settlement of assembled parts
Store bags of fuel at least 1 metre away from the boiler, in a dry and sheltered part of the home.
DO NOT EXCEED THE PERCENTAGE OF 60% OF CORN IN THE MIXTURE WITH WOOD PELLETS.
Other finely chopped fuels (for example: olive pits, shells, etc..) can be used alone, “not mixed”
with wood pellets, but they must have a minimum diameter of 4mm (to be used only in stoves with
biomass burner).
WARNING: (see UNI10683 standard)
One must always guarantee a natural force draught in the flue between 6 and 8 Pa, to avoid that, if the
electric power should go out unexpectedly or adverse environmental conditions should arise, the room may be
filled with smoke or electric components overheat.
SPECIAL WARNING
Improper flue draught, excessive humidity in the fuel, or an elevated ash residue in the
combustion chamber may cause THE STOVE TO NOT START AND IS NOT A RESULT OF A
DEFECTIVE PRODUCT.
In case of no switch-on, clean the crucible before restarting the boiler.
Check that the aeration of the machine installation is always correct
(UNI10683 and UNI7129 Standard)
