20
Maintenance
Cleaning
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before cleaning, performing maintenance, or moving this fireplace. Failure to do so
could result in
electric shock, fire, or personal injury
.
NEVER immerse in water
or
spray with water.
Doing so could result in
electric shock,
fire, or personal injury.
Metal:
• Buff using a soft microfiber cloth. Slightly dampen microfiber cloth with water to clean metal
surfaces.
•
DO NOT
use brass polish or household cleaners as these products will damage the metal trim.
Glass:
• Use a good quality glass cleaner sprayed onto the cloth or towel. Dry thoroughly with a paper
towel or lint-free cloth.
•
NEVER
use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Vents:
• Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
Plastic:
• Wipe gently with a slightly damp cloth and a mild solution of dish soap and warm water.
•
NEVER
use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Maintenance
Risk of electric shock
!
DO NOT OPEN any panels ! No user-serviceable parts
inside!
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in
electricshock,fire,or personalinjury
.
Electrical and Moving Parts:
• The fan motors are lubricated at the factory and will not require lubrication.
• Electricalcomponents areintegrated in thefireplace and are notserviceable by the
consumer.
• Energy-saving LED light strip is built into the product and is NOT replaceable by the
consumer.
Storage:
• Store heater in a clean dry place when not in use.
WARNING! NO SERVICING
of the internal or electrical parts should be performed by the
consumer.Do notservice the unityourself.
Model#
LED strip quantity
LED lumens
Life span
LED power
BG-36B
2 PIECES
8
00lm
25000 hours
8
W
BG-50B
2
PIECES
8
00lm
25000 hours
8
W
