background image

Page 3

Fiberlink® 3X3X Series User’s Manual

Fiberlink® 3X3X Series

Welcome

Thank you for purchasing Communications Specialties, Inc.’s Fiberlink® 3X3X Series.  
The all-digital Fiberlink® 3134 series allows you to multiplex up to 10 video channels onto a 
single fiber optic core offering unsurpassed signal distribution efficiency. Fiberlink 3134 is 
compatible with Fiberlink Matrix offering you the ability to route up to 320 video signals. 

Fiberlink® 3334 adds RS-Type Data to the same fiber optic cable.

Features

 

• No adjustments; pure digital processing and transmission 

 

• Full color, uncompressed, real-time transmission in NTSC, PAL or SECAM 

 

• Optional RS-Type Data

 

• Built-in diagnostic LEDs for each channel and a loss of signal/broken fiber alarm 

 

• Internal, universal power supply with AC line cord 

 

• Fiberlink Matrix Compatible

 

• One rack unit high (1.75 inches). 

 

• Rackmount ears included with unit

Package Contents

 

• One  Fiberlink® 3134, 3135, 3334 or 3335

 

• This User’s Manual

 

• AC Line Cord

 

• Rackmount Ears

 

• Accessories Pack (fuses, rubber feet, etc)

Welcome | Features | Package Contents

Summary of Contents for Fiberlink 3 Series

















Reviews: