13
English
4.1. Wireless modes
2.4 G
Set the "Connection mode toggle switch" (12) to position "2.4 G". Remove the
receiver from the back of the device and connect it to a free USB port on the desi-
red device. This can also be done even during ongoing use thanks to "Plug and
Play".
The device driver is installed automatically. Manual installation from a driver CD
is not required. Once the display on the mouse shows "Connected", the device is
ready for use.
Bluetooth
Set the "Connection mode toggle switch" (12) to "Bluetooth" position.
1.
Press the "Pairing button" (11) to change to the pairing mode.
2.
Turn on the Bluetooth connection of the desired device with which you
want to connect the mouse.
3.
Search for the "Bluetooth Mouse" in your Bluetooth environment.
4.
Press the "Pairing button" (11) and wait until the Bluetooth device is
installed.
5.
Once the connection is established, you can see the "Connection status" on
the mouse display which shows "Connected". This means that you can now
use the mouse.
You should complete the Bluetooth pairing process within 3 minutes. If you cannot
do this, you have to repeat the pairing process.
5. Customising the buttons
You can customise the buttons of the mouse individually. The following mouse
buttons can not be re-assigned: 1, 2, 3, 6
Summary of Contents for 20200921DG049
