CSL CS101-2 EPC CLASS 1 GEN 2 RFID HANDHELD READER
USER'S MANUAL, VERSION 1.0
Copyright © Convergence Systems Limited, All Rights Reserved
23
5.3
Setup RFID Configuration
One can set up operation profile of the RFID reading and writing operation by going to the
RFID Configuration screen.
Please set above parameters to default operation profile.
•
Please open page “Link Profile” as shown in Figure 5-3. You can reach the page by
clicking “RFID Config -> Link Profile”.
•
Select correct values and then click “Apply” button.
Figure 5-3 Reader Configuration Screen
