Operation
Installing
the
drawers
□
Pull the
slides
and
slide
carrier
out until
fully
extended
.
□
Hold
the
slide
on
the
cabinet
while
aligning
it
with
the
slide
on
the
drawer
.
□
□
Slowly
push
the
drawer
until
it
is
fully
closed
to
engage
the
slide
.
□
Open
the
drawer
and
close
it
to
verify
proper
operation
.
Slightly insert one side and repeat for the other side.
3
2
Removing
the
drawers
□
Fully
extend
and
empty
the
drawer
.
□
Please lift the release lever on one side of the slide and lower
the lever on the other side simultaneously, so the slides can
ride over the
stops
.
Pull
out
to
remove
.
1
Locking
and
unlocking
the
unit
IMPORTANT
:
The
drawers
must
be
fully
closed
before
locking / unlocking
the
unit
.
□
To lock the unit, insert
the
key (J)
into the lock cylinder (K)
□
To unlock the unit, insert
the
key (J)
into the lock cylinder (K)
10
J
and
turn
it
1/4-turn to
the
left. Then remove the key.
and
turn
it
1/4-turn to
the
right. Then remove the key.
4
Pull-out work surface
□
Fully
extend
the drawer and
you will hear “Click” sound
□
that means the work surface is on the security position.
Hand push the drawer to release the security and close
Open:
Close:
the drawer.
