-28-
Indicating a Plumb Line/Vertical Plane
(see figure B)
To indicate a plumb line or a vertical plane,
set up the laser tool in the vertical position.
When the vertical plane is supposed to run at a
right angle to a reference line (e.g. a wall), then
align the plumb beam
15
with this reference
line. The plumb line is indicated by the rotating
laser beam
14
.
Working without Laser Detector
(see figure C)
Under favorable light conditions (dark environ-
ment) and for short distances, it is possible
to work without the laser detector. For better
visibility of the laser beam, either select line
operation, or select point operation.
Working with the Laser Detector
(see figure D)
Under unfavorable light conditions (bright
environment, direct sunlight) and for larger
distances, use the laser detector for improved
finding of the laser beam. When working with
the laser detector, select rotational operation
with the highest rotational speed (600 rpm)
Measuring Over Long Distances
(see figure E)
When measuring over long distances, the laser
detector must be used to find the laser beam.
In order to reduce interferences, the laser tool
should always be set up in the center of the
work surface and on a tripod.
Working Outdoors (see figure F)
The laser detector should always be used when
working outdoors. When working on unstable
ground, mount the laser tool onto the tripod
23
. Activate the ADS function in order to
avoid faulty measurements in case of ground
vibrations or shock to the laser tool.
Applications RL25H/RL25HV
Overview of LED Indications
On
Laser/motor/LED in continuous operation
Off
Laser/motor/LED in continuously stopped
nx/s
Laser/LED blinks n times/second
N/C
No change from previous state
N/C**
Will indicate status if enabled or disabled
Laser
Beam
Rotation
of Laser
Green
Green
Green
Red
Red
Switching on the tool (1.5s self-
check)
2x/s
Off
2x/s
2x/s
2x/s
Off
2x/s
Leveling in or re-leveling
2x/s
Off
N/C
2x/s
N/C
N/C
N/C
Measuring tool leveled in/ready
for operation
On
On
On
On
N/C**
N/C
N/C
Self-leveling range exceeded
2x/s
Off
Alt 2x/s
Alt2x/s
Off
Off
Off
ADS function activated (two axes)
N/C
N/C
On
N/C
On
Off
N/C
ADS function activated (one axis)
N/C
N/C
1x/s
N/C
1x/s
Off
N/C
ADS actuated
2x/s
Off
N/C
On
Off
2x/s
N/C
ADS function switched off
N/C
N/C
N/C
N/C
Off
Off
N/C
Slope function is actuated
N/C
N/C
1x/s
N/C
N/C
N/C
N/C
Hibernation mode
Off
Off
Off
0.2s On
Off
Off
N/C
Battery usable
N/C
N/C
N/C
N/C
N/C
N/C
Off
Battery voltage for ≤2 H operation
N/C
N/C
N/C
N/C
N/C
N/C
1x/s
Battery empty
Off
Off
Off
Off
Off
Off
On
Summary of Contents for rl25h
