1
、
Purpose of this guide
This guide contains information regarding the installation and safe handling of China Sunergy
(Nanjing) Co., Ltd photovoltaic module (hereafter is referred to as “module”). China Sunergy(Nanjing)
Co., Ltd (hereafter is referred to as “CSUN”.)
Installers must read and understand the guide before installation. Any questions, please contact our
customer service department for further explanations. The installer should conform to all safety
precautions in the guide and local codes when installing a module.
Before installing a solar photovoltaic system, installers should become familiar with the mechanical
and electrical requirement for such a system. Keep this guide in a safe place for future reference (care and
maintenance) and
in case of sale or disposal of the modules.
⑴
General
z
Installing solar photovoltaic systems may require specialized skills and knowledge. Installation
should be performed only by qualified persons.
z
Each module comes with a permanently attached junction box. CSUN can provide customers
with fitted cables for ease of installation if desired. Installers should assume the risk of all injury
that might occur during installation, including, without limitation, the risk of electric shock.
z
One individual module may generate DC voltages greater than 30 volts when exposed to direct
sunlight. Contact with a DC voltage of 30V or more is potentially hazardous.
z
Photovoltaic modules are designed for outdoor use. Modules may be ground mounted, mounted
on rooftops, vehicles or boats. Proper design of support structures is responsibility of the system
designers and installers. Use of mounting holes is suggested in a following paragraph.
z
Do not attempt to disassemble the modules, and do not remove any attached nameplates or
components from the modules. Do not disconnect under load.
