QUICK START GUIDE
The P375 pedometer can be setup using the default values, so for a quick setup all
you need to do is set the clock and date. This will provide you with average estimates
for your calories burnt and distance walked.
1. REMOVE THE BATTERY INSULATOR TAB
A.
Remove the pedometer from the clip.
B. Remove battery insulator
C. The pedometer will turn on and display Step
Mode
2. ENTER SETUP MODE
- CAN ONLY ENTER FROM STEP MODE
Make sure the pedometer is in STEP mode as
on previous page – NOT Memory mode and
NOT Total Step mode.
Press the
MODE
button consecutively until
Step Mode is displayed (if you are on a
different view).
Press and hold
SET
button for 3 seconds, “ADJ”
will flash and then “12Hr” will flash.
