CTC Union ERM-MUX, User Manual

LEGAL 

The information in this publication has been carefully checked and is believed to be entirely accurate at the time of publication. 
CTC Union Technologies assumes no responsibility, however, for possible errors or omissions, or for any consequences 
resulting from the use of the information contained herein. CTC Union Technologies reserves the right to make changes in its 
products or product specifications with the intent to improve function or design at any time and without notice and is not 
required to update this documentation to reflect such changes. 
 
CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any 
particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and 
specifically disclaims any and all liability, including without limitation any consequential or incidental damages. 
 
CTC Union products are not designed, intended, or authorized for use in systems or applications intended to support or sustain 
life, or for any other application in which the failure of the product could create a situation where personal injury or death may 
occur. Should the Buyer purchase or use a CTC Union product for any such unintended or unauthorized application, the Buyer 
shall indemnify and hold CTC Union Technologies and its officers, employees, subsidiaries, affiliates, and distributors 
harmless against all claims, costs, damages, expenses, and reasonable attorney fees arising out of, either directly or indirectly, 
any claim of personal injury or death that may be associated with such unintended or unauthorized use, even if such claim 
alleges that CTC Union Technologies was negligent regarding the design or manufacture of said product. 
 

TRADEMARKS 

Microsoft is a registered trademark of Microsoft Corp. 
HyperTerminal™ is a registered trademark of Hilgraeve Inc. 
 

WARNING: 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not 
installed and used in accordance with the instruction manual may cause harmful interference in which case the user will be 
required to correct the interference at his own expense. NOTICE: (1) The changes or modifications not expressively approved 
by the party responsible for compliance could void the user's authority to operate the equipment. (2) Shielded interface cables 
and AC power cord, if any, must be used in order to comply with the emission limits. 
 

CISPR PUB.22 Class A COMPLIANCE: 

This device complies with EMC directive of the European Community and meets or exceeds the following technical standard. 
EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment. 
This device complies with CISPR Class A. 
 

WARNING: 

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be 
required to take adequate measures. 
 

CE NOTICE 

Marking by the symbol CE indicates compliance of this equipment to the EMC directive of the European Community. Such 
marking is indicative that this equipment meets or exceeds the following technical standards: EN 
55022:1994/A1:1995/A2:1997 Class A and EN61000-3-2:1995, EN61000-3-3:1995 and EN50082-1:1997