FRM220 Chassis Quick Installation Guide
10
FRM220-CH01M/xx Single Slot Chassis w/ Built-in Power and Console
The FRM220-CH01M/xx is designed for tabletop or bench installation. A card slides into the
chassis for a complete, assembled, stand-alone unit. This chassis features single or dual built-in
power supplies. The build-in AC power supply supports power input from 90~264VAC via an industry
standard IEC power connector. Built-in DC power supplies use a screw terminal block to connect DC
voltage and supports a range of 18~75VDC. Power options include single AC or DC, dual AC
(redundant), dual DC (redundant) or with one AC and one DC (redundant) power supplies. A Female
DB9 provides local management via serial console (RS232).
Installation
Remove the card carefully from packaging after first touching a grounded object, to remove static
charge from your body. Hold the card by the metal face plate and NEVER touch any components on
the board. Align the card with the slots of the CH01M/xx chassis and slide the card all the way in. Use
the thumb screw to secure the card, tightening it only hand tight.
Figure: CH01M/xx Installation
The DB9F is a DCE to a PC's DTE COM port, providing a simple 1:1 connection with the supplied
DB9F to DB9M 1 meter cable. See the technical sheet for the installed card to understand the serial
port settings required to manage that card.
Wall Mounting
FRM220-CH01M/xx standalone chassis have the option of adding wall mount capability. One wall
mount kit is required for installing a single standalone chassis on the wall. Each wall mount kit
provides two wall mounting brackets and the screws to attach the bracket to the CH01M/xx chassis.
Screws to attach to a wall are not included.
Use the brackets as a template for drilling holes in a wall and attaching screws. Screws should be
chosen that allow the screw head to pass through the hole in the bracket. The screws in the wall
should be screwed in leaving just enough space so the bracket and CH01M/xx can be hung securely.
Figure: CH01M/xx with Wall Mount Bracket