FRM220 Chassis Quick Installation Guide
9
Wall Mounting
FRM220-CH01/xx standalone chassis has the option of adding wall mount capability. Two wall
mount kits are required for installing a single standalone chassis on the wall. Each wall mount kit
provides one wall mounting brackets and the screws to attach the bracket to the CH01/xx chassis.
Screws to attach to a wall are not included.
Use the brackets as a template for drilling holes in a wall and attaching screws. Screws should be
chosen that allow the screw head to pass through the hole in the bracket. The screws in the wall
should be screwed in leaving just enough space so the bracket and CH01/xx can be hung securely.
Figure: CH01/xx with Wall Mount Bracket
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
CE NOTICE
Marking by the symbol CE indicates compliance of this equipment to the EMC directive of the
European Community. Such marking is indicative that this equipment meets or exceeds the following
technical standards: EN 55022:1994/A1:1995/A2:1997 Class A and EN61000-3-2:1995, EN61000-3-
3:1995 and EN50082-1:1997