40
FU7025_IM_CTC - 107x107mm
23.01.18
1. Press and hold the TIME button for about 3 seconds until the time display format
(24 Hr) in the display starts flashing.
2. Now you can set the time display format (24 Hr or 12 Hr), time zone, hours, minutes,
year (yr), month (M), day (D) and the day of the week display language with the
buttons UP and DOWN. For the weekday language you can choose from the
following languages: GER = German, ENG = English, ITA = Italian, FRE = French,
DUT = Dutch, SPA = Spanish, DAN = Danish.
NOTE
:
•
Time zone 00:
The Central European Time “CET” (UTC+1) is the default setting.
Even when the device receives a radio signal later on, the manually set time zone
is maintained.
• The input is stored automatically within approximately 30 seconds when no button
is pressed.
• Setting of the weekday is done automatically.
• If 12 hour is selected, the following will appear: PM = afternoon
Alarm Function
NOTE: Important!
The alarm time cannot be set, activated or deactivated whilst the device is searching
for a radio signal.
Setting of the Alarm
1. Press the ALARM button for approximately 3 seconds. The display shows “ “ and
the number of the actually set alarm time starts to flash.
Summary of Contents for FUNKUHR FU 7025
Page 56: ...FU7025_IM_CTC 107x107mm 23 01 18...