CTC Union VDTU01, User Manual

VDSL.                                                                                                      CTC Union

3

General Rules 

Before making connections to the converter, note the following rules: 

Ethernet Port (RJ-45) 

      All network connections to the Converter Ethernet port must be 

made using Category 5 UTP for 100Mbps; Category 3,4 UTP for 
10Mbps 
No more than 100 meters of cabling may be use between the MUX 
or HUB and an end node. 

VDSL Port (RJ-11) 

            All Home network connections to the RJ-11Port made using 24~26 

Gauge phone wiring. 

We do not recommend using 28 Gauge or above phone line. 

 
Connecting the Converter 

The converter has one ETHERNET port which support connection to 
Ethernet operation. The devices attached to these ports must support 
auto-negotiation or 10Base-T OR 100Base-TX unless they will always 
operate at half duplex. 
Use any of the Ethernet ports to connect to devices such as HUB, 
concentrator, bridge or router. You can also connect to another 
compatible converter to an RJ-45 port on the other device. 
The RJ11 Line port are use to connect to the wall RJ-11 modular 
socket which is connect to VDSL Switch or VDSL converter CO side 
 
The RJ11 Phone port of the converter can connected to a telephone 
and a computer sharing one telephone wire for making calls and 
accessing the Internet at the same time.