Aerial work platform
B-LIFT 18 HV
1
COD. UM0287_GB | REV. 00 | ED: 09/18
Chapter 01
GB
GENERAL INFORMATION
1
GENERAL INFORMATION
1
General information
1.1
Manufacturer information
CTE S.p.A.
Via Caproni 7, Z.I.
38068 Rovereto (Trento)
Italy
Phone:
+39 0464 485050
Fax:
+39 0464 485099
Website:
www.ctelift.com
e-mail:
info@ctelift.com
1.2
Limitations of responsibility
The manufacturer is responsible for the machine in its initial coniguration.
The use of non-original spare parts, modiication of the machine, installation of any accessories not
supplied or authorised by the manufacturer, or performing maintenance operations that do not comply
with the instructions in this manual shall relieve the Manufacturer of any responsibility for damage
or injury.
The customer shall bear responsibility for ensuring their workers collaborate and have the necessary
expertise.
Acceptance of the machine expressly commits the customer to maintain it unaltered and to not remove,
move or partially or completely disable the protective devices, guards and any and all other safety
devices with which it is equipped.
Any defect that may be discovered must be reported to the manufacturer.
The manufacturer shall hold themselves exempt from all responsibility and obligations for any damage
and/or injury caused by the following:
•
Use of the machine outside the limits described in this manual.
