User & installation instructions
3
CTEK E-Mobility AB
EN
3.
Back cover.
4.
Technical box.
5.
Electrical Vehicle outlet.
6.
Electrical Vehicle outlet (fixed cable).
Status symbols
SYMBOL
COLOR
MODE
EXPLANATION
Open
RFID symbol not active.
Solid green
RFID
Waiting for RFID tag.
Flashing
Yellow
RFID
Authentication in progress. Please wait!
Flashing
Green
RFID
RFID tag approved. Charging will now
start.
Flashing
red once
RFID
RFID tag access denied (user not
authorized for charging).
Solid green
RFID/
Open
Available and ready for charging.
Flashing
green
RFID
Waiting for cable connection or
authentication.
Solid Blue
RFID/
Open
Vehicle connected but not charging (for
example, the vehicle is fully charged or
the charging session is paused).
Flashing
Blue
RFID/
Open
Charging in progress.
SYMBOL
COLOR
MODE
EXPLANATION
Solid Red
RFID/
Open
Alarm active. Most likely a fuse has
tripped. Open the technical box and
reset the fuse.
Outlet has a temporary fault. The fault
could be one of the following:
• Time limit for authentication reached.
• PP-signal cannot be read from cable
(Only applicable for type 2 outlet).
• Outlet motor could not lock cable.
Solid Blue
-
The charging station has connected to
cloud backend. Only displayed during
boot up. The flashing will take place for
5 seconds.
Solid Red
RFID/
Open
The charging station has failed to
connect to the cloud backend during
start up. Only displayed during boot up.
NOTE:
If the charging station has no active symbols, the charging station is
inactive. This may be because it has been configured in that way, because
the charging station is restarting, or because the charging station has been
deactivated for planned maintenance.
