GraphiteVPX/CPU TX2/TX2i/TX1
Users Guide
Document: CTIM-00476
Revision: 0.05
Page 13 of 24
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019-04-16
Jumper Summary & Locations
J2 is a 2mm standard header that is used for PCIe Backplane Port configuration and selection of USB 3.0 or SATA.
Header Position #
Description
1
This is a Factory Jumper used to force on
power when no module is present. Do Not
install.
CRR_ON
2
This is Unused. Not Installed, Display =
HDMI
DP/HDMI
3
PCIe Non-Transparent Port setup:
Installed – NT port is assigned to
backplane PCIe port 2
NT0*
4
PCIe Non-Transparent Port setup:
Installed –
Default mode
– NT port
Disabled on all ports.
NT1*
5
PCIe Non-Transparent Port setup:
Installed – NT port is assigned to
backplane PCIe port 3.
NT2*
6
Second USB 3.0 port or SATA Sel jumper
Installed = USB3.0, Removed = SATA
USB3/SATA
*Note: Only one NT jumper can be installed at any one time. One site needs to be
installed at all times.
