GraphiteVPX/CPU TX2/TX2i/TX1
Users Guide
Document: CTIM-00476
Revision: 0.05
Page 15 of 24
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019-04-16
Detailed Feature Description RTG004
The RTG004 GraphiteVPX/CPU TX2/TX2i/TX1 RTM (Rear Transition Module) is supplied to allow user
access to all the interfaces available in a lab development environment.
Power Input
The RTG004 accepts a standard VPX VITA 46 power input on the rear of the backplane
VS1 = Not Used, VS2 = 3.3V, VS3 = 5V (HDMI pwr) and 3V3_AUX.
Console
The RTG004 has console port access using P4, a 10 pin Minitek keyed connector. Cable CBG111 is used
(drawing is available here CTIC-00430) to allow for remote or headless use of the System. The cable is
supplied with each RTG004 (Note: only one serial connector is used, the other is not connected).
10/100/1000 Ethernet
Two Gigabit Ethernet RJ45 ports are available, one interface comes from the TX2/TX1 onboard (ETH0). The
second is a PCIe based Intel 82574 Ethernet Controller (ETH1).
Display (HDMI only)
One HDMI video connector is available for display up to 4k.
