User's Manual
HS-7200 Series
Other Problems
：
20
•
Rehab Chair will not move when the power is turned on:
1.Check the Battery Level Indicator on the joystick. All the LED lights should be on.
2.Check the Self-Diagnostic Warning Light. It should be steady. If it is flashing, see the
chart on page 19 for the problem identification.
3.Check all electrical connections to be sure they are tight.
4.If none of these suggestions correct the problem, contact your authorized dealer.
•
If charging your rehab chair over 14 hours and the light on the charger does not change
to green, then contact your authorized dealer.
Please note that your rehab chair is equipped with a controller that constantly checks the
drive system for a safe and enjoyable ride. If an error occurs, the Battery Level Indicator
will provide you an indication of the problem by way of flashing lights.
We thank you again for choosing C.T.M. for your rehab chair. C.T.M. offers exceptional,
uncompromised quality, for better mobility.
"When you compare, the decision will be obvious: C.T.M."
