7. DIP Switch
The front panel of EPS-2006 has one DIP switch that supports
“Default” and “CCTV” modes. The detailed description are shown
in the following.
Note:
After change the mode, in order to the corresponding
configuration take effect. The switch needs to restart manually.
Default DIP Switch Mode
The default (CCTV OFF) DIP switch mode is general switch mode
that can normal communication between port 1~6.
CCTV DIP Switch Mode
The CCTV ON DIP switch mode is extension and port isolation
mode that allows 1-4 port to extend your network distance up to
250 meters at 10Mbps while remaining to support 30W PoE power
output.
8. Technical Specifications
Standards
IEEE 802.3 10Base-T,IEEE 802.3u 100Base-TX,
IEEE 802.3x Flow Control,
IEEE 802.3af Power over Ethernet,
IEEE 802.3at Power over Ethernet Plus
Interface
6-Port RJ-45 for 10/100Base-TX, auto MDI/MDIX
PoE Injector Port
4-Port 802.3af/at PoE Injector (Port-1 to Port-4)
PoE Power Output
Max. 30W per port
PoE Budget
60W
Jumbo Frame
2K
MAC Address Table
2K
LED
Power, Link/ACT, PoE
Power
AC Input Voltage: 100V-240V 50/60Hz
Shipping Weight
1kg
Dimensions
168(W) x 93(D) x 32(H)mm
Temperature
Operating: 0
o
C~50
o
C; Storage: -20
o
C~60
o
C
Humidity
5%~90% RH non-condensing
EMC Safety
FCC Part 15 Class A, CE
Media
TP:
EIA/TIA-568 CAT 3/4/5/5e
*
Please contact us for further reports and updates.
NOTE:
Specifications may change without prior notice.
Contact Information
Connection Technology Systems INC (CTS)
18F-6, No.79, Sec.1, Xintai 5th Rd., Xizhi Dist.,
New Taipei City 221, TAIWAN, R.O.C.
TEL: +886 2 26989661 FAX: +886 2 26989662
E-Mail: info@ctsystem.com
EPS-2006
4-Port 10/100Base-TX
802.3at PoE+
With 2-Port 10/100Base-TX
Switch
User’s Guide
Version 1.0
