background image

 

1. INTRODUCTION 

Thank  you  for  choosing  20  PORTS  SFP  (100/1000BASE-X) WITH  4  COMBO 
PORTS UPLINK MANAGEMENT SWITCH. This Managed Switch is specifically 
designed  to  meet  the  emerging  FTTX  and  Metro  Ethernet  requirements  that 
can extend the transmission distance up to 80KM depending on SFP modules 
used.  The  design  of  the  Managed  Switch  with  1U  height  and  19-inch  depth 
classic  appearance  is  rack-mountable  and  also  achieves  the  highest  density. 
The  managed  Switch  can  provide  the  best  performance  and  price  ratio  when 
multiple fiber ports need to be deployed in networking environment. 
 

1.1 The Managed Switch 

This Managed Switch is compact, 19-inch, and rack-mountable, and has 20 
100/1000Mbps SFP ports and 4 combo ports (either 10/100/1000 copper or 
1000Mbps SFP connectivity) on the front panel. This Managed Switch provides 
high performance store-and-forward switching capability plus other advanced 
features such as QoS, VLAN, etc..  
 
Clear, at-a-glance per-port LED indicators make it easier for users to control 
and manage network status. The built-in management module also allows 
users to configure, control and monitor the system locally via console or 
remotely via SNMP based management system.  
 
This Managed Switch is particularly suitable for the SFP to Metro Ethernet 
applications. Its low profile appearance with 1U height and laptop simple 19 
inch dimensions achieves the highest density and can be used in closet wiring 
or used as a desktop switch. 

Summary of Contents for FOS-3124-BAT-II Series




















Reviews: