56
Time Synchronization:
To enable or disable time synchronization.
Time Server Address:
NTP time server address.
2nd Time Server Address:
When the default time server is down, the CHASSIS will
automatically connect to the 2nd time server.
Synchronization Interval:
The time interval to synchronize from NTP time server.
Time Zone:
Select the appropriate time zone from the pull-down menu.
Daylight Saving Time:
To enable or disable the daylight saving time function. It is a way of
getting more daytime hour(s) by setting the time to be hour(s) ahead in the morning.
Daylight Saving Time Date Start:
Click the pull-down menu to select the start date of
daylight saving time.
Daylight Saving Time Date End:
Click the pull-down menu to select the end date of
daylight saving time.
NOTE:
We use SNTP to get the time from those NTP servers. It is recommended that the
time server is in the same LAN with the CHASSIS or at least not too far away. In this way,
the time will be more accurate.
4.3.5 Device Community
Select the option
Device Community
from the
Network Management
menu, then the
Device Community
page shows up.
