Introduction
Publication date: April 17, 2020
Revision 1.1
8
TP Port
1~12
Port Status
OFF
No connection exists.
Green
Lit when TP 10/100Mbps port link is up.
Blinking when TP port is receiving and
transmitting data at the speed of 10/100Mbps.
Orange
Lit when TP 1000Mbps port link is up.
Blinking when TP port is receiving and
transmitting data at the speed of 1000Mbps.
SFP Port
9~12
Port Status
OFF
No connection exists.
Green
Lit when Fiber 100Mbps port link is up.
Blinking when Fiber port is receiving and
transmitting data at the speed of 100Mbps.
Orange
Lit when Fiber 1000Mbps port link is up.
Blinking when Fiber port is receiving and
transmitting data at the speed of 1000Mbps.
1.5 Cable Specifications
The following table contains various cable specifications for the Managed Switch. Please make sure
that you use the proper cable when connecting the Managed Switch.
Cable Type
Description
10Base-T
UTP Category 3, 4, 5 (100 meters max.)
EIA/TIA- 568 150-ohm STP (100 meters max.)
100Base-TX
UTP Cat. 5 (100 meters max.)
EIA/TIA-568 150-ohm STP (100 meters max.)
1000Base-T
UTP Cat. 5e (100 meters max.)
UTP Cat. 5 (100 meters max.)
EIA/TIA-568B 150-ohm STP (100 meters max.)
100BASE-FX
Multi-mode fiber module(2km) / Single-mode fiber
module
1000BASE-SX
Multi-mode fiber module (550m)
1000BASE-LX
Single-mode fiber module (10km)
1000BASE-LH
Single-mode fiber module (30km/50km)
1000BASE-ZX
Single-mode fiber module (80km)
SFP Transceiver
SFP Transceiver for 1000BASE-SX Multi-mode fiber
module (550m)
SFP Transceiver for 1000BASE-LX Single-mode fiber
module (10km)
SFP Transceiver for 1000BASE-LH Single-mode fiber
module (30km/50km)
SFP Transceiver for 1000BASE-ZX Single-mode fiber
module (80km)
