Installation
Publication date: April 17, 2020
Revision 1.1
11
2.3 Installing the Managed Switch
You can install the SWH-3112 Managed Switch on a flat surface or mount it in a standard 19-inch
network equipment rack.
CAUTION
To prevent any damage or failure of the Managed Switch, please DO NOT block
the ventilation holes.
Use the following guidelines when choosing a place to install the switch:
Firm and steady flat surface.
Proper power outlet location, not too far from the device.
Visually inspect the power cord and see that it is secured to the AC power connector.
Make sure that there is proper heat dissipation from and adequate ventilation around the
switch. Do not place heavy objects on the Managed Switch.
2.3.1 Desktop Installation
The switch can be placed in any flat and steady surface with proper air ventilation. Four rubber feet
with adhesive backing are provided for this kind of installation.
Procedures
➊
Attach rubber feet on the bottom at each corner of the device.
➋
Select a flat and steady surface to place the switch.
➌
Allow adequate space for ventilation between the device and the objects around it.
