Installation
Publication date: April 17, 2020
Revision 1.1
14
2.4 Powering on the Managed Switch
The Managed Switch can be used with AC power supply 100-240 V, 50
–60 Hz. After the Managed
Switch is turned on, the Power LED indicator should light in green color. For more details about the
power LED description, please refer to Section
Power Failure
In the event of power failure, unplug the power that is plugged into the switch at the back of the
device. When power is resumed, plug the power back to the switch.
2.5 Connecting the Managed Switch to the
Network
Connect to Network
The Managed Switch has 8 10/100/1000BASE-T RJ-45 ports and 4 combo ports in the front panel.
These 8 RJ-45 ports can be plugged with 10/100/1000Base-T UTP cable. Uplink combo ports 9-12
can be plugged with 100Base-FX, 1000Base-X SFP Fiber transceiver or 10/100/1000Base-T UTP
cable. The connection of the fiber port must be matched, i.e. Transmitter to Receiver, and vice versa.
