Introduction
Publication date: April 17, 2020
Revision 1.1
5
1.3 Front & Rear Panels
1.3.1 Front Panel
The interfaces on the front panel of the Managed Switch are described below:
1. 8 x 10/100/1000Base-T RJ-45 ports (Ports 1-8)
2. 4 x Gigabit combo ports (Ports 9-12):
4 x 10/100/1000Base-T RJ-45 ports, or
4 x 100/1000Base-X SFP ports
3. LEDs:
Includes Power LED, System LED, LEDs of TP 1~8 ports and LEDs of TP & Fiber
9~12 ports. For more details on LEDs description, please refer to Section
4. Reset Button:
Press the reset button for 5~10 seconds, then release it to restart the system.
Press the reset button for more than 10 seconds, then release it to reset the
Managed Switch. The settings will be back to the factory defaults and restart the
system.
5. Console Port:
An asynchronous serial console port supports the RS-232 electrical specification.
The console port can be used to manage the device, and the serial console port
settings should be configured as 9600(Default), 8, n, 1.
Figure 1-1. SWH-3112 Managed Switch Front Panel
1
5
4
3
1
2
3
3
