background image

IMPORTANT:

 To obtain warranty coverage owner may be required 

to present an original proof of purchase and applicable maintenance 

records to the servicing dealer. Please see the operator’s manual for 

information on required maintenance and service intervals.
The limited warranty set forth below is given by Cub Cadet LLC with 

respect to new merchandise purchased or leased and used in the 

United States and/or its territories and possessions, and by MTD 

Products Limited with respect to new merchandise purchased or 

leased and used in Canada and/or its territories and possessions 

(either entity respectively, “Cub Cadet”).
Cub Cadet warrants this product (excluding its 

Normal Wear Parts

, as 

described below) against defects in material and workmanship for 

a period of two (2) years commencing on the date of original retail 

purchase or lease and will, at its option, repair or replace, free of 

charge, any part found to be defective in materials or workmanship.

Normal Wear Parts

 are warranted to be free from defects in material 

and workmanship for a period of thirty (30) days from the date of 

original purchase or lease. Normal wear parts include, but are not 

limited to items such as:  belts, blades, blade adapters, grass bags, 

rider deck wheels, seats and tires.
This limited warranty shall only apply if this product has been 

operated and maintained in accordance with the Operator’s 

Manual furnished with the product, and has not been subject to 

misuse, abuse, neglect, accident, improper maintenance, alteration, 

vandalism, theft, fire, water or damage because of other peril or 

natural disaster. Damage resulting from the installation or use of any 

part, accessory or attachment not approved by Cub Cadet for use 

with the product(s) covered by this manual will void your warranty as 

to any resulting damage. In addition, Cub Cadet may deny warranty 

coverage if the hour meter, or any part thereof, is altered, modified, 

disconnected or otherwise tampered with.

HOW TO OBTAIN SERVICE: 

Warranty service is available, WITH 

PROOF OF PURCHASE AND APPLICABLE MAINTENANCE RECORDS, 

through your local authorized service dealer. To locate the dealer in 

your area:

In the U.S.A.

 

Check your Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131, 

Cleveland, Ohio 44136-0019, call 1-877-282- 8684 

or log on to our website at www.cubcadet.com. 

In Canada 

Contact MTD Products Limited, Kitchener, ON  N2G 4J1, call 1-800-

668-1238 or log on to our website at www.mtdcanada.com. 

Without limiting the foregoing, this limited warranty does not provide 

coverage in the following cases:
a. 

Routine maintenance items such as lubricants, filters, blade 

sharpening, tune-ups, brake adjustments, clutch adjustments, 

deck adjustments, and normal deterioration of the exterior 

finish due to use or exposure. 

b. 

Service completed by someone other than an authorized 

service dealer. 

c. 

Cub Cadet does not extend any warranty for products sold 

or exported outside of the United States and/or Canada, and 

their respective possessions and territories, except those sold 

through Cub Cadet’s authorized channels of export distribution. 

d. 

Replacement parts and\or accessories that are not genuine Cub 

Cadet parts. 

e. 

Transportation charges and service calls.

f. 

Commercial or Institutional Use.

There are no implied warranties, including without limitation 

any implied warranty of merchantability or fitness for a 

particular purpose. No warranties shall apply after the 

applicable period of express written warranty above. No other 

express warranties beyond those mentioned above, given by 

any person or entity, including a dealer or retailer, with respect 

to any product, shall bind Cub Cadet.  The exclusive remedy is 

repair or replacement of the product as set forth above.
The terms of this warranty provide the sole and exclusive 

remedy arising from the sale and/or lease of the products 

covered hereby. Cub Cadet shall not be liable for any incidental 

or consequential loss or damage including, without limitation, 

expenses incurred for substitute or replacement lawn care 

services or for rental expenses to temporarily replace a 

warranted product. 

Some jurisdictions do not allow the exclusion or limitation of 

incidental or consequential damages, or limitations on how long an 

implied warranty lasts, so the above exclusions or limitations may not 

apply to you. 
In no event shall recovery of any kind be greater than the amount of 

the purchase price of the product sold. 

Alteration of safety features 

of the product shall void this warranty.

 You assume the risk and 

liability for loss, damage, or injury to you and your property and/or to 

others and their property arising out of the misuse or inability to use 

the product. 
This limited warranty shall not extend to anyone other than the 

original purchaser or to the person for whom it was purchased as a 

gift. 

HOW LOCAL LAWS RELATE TO THIS WARRANTY: 

This limited 

warranty gives you specific legal rights, and you may also have other 

rights that vary in different jurisdictions. 

CUB CADET LLC 

MANUFACTURER’S LIMITED WARRANTY 

FOR SEPARATELY SOLD ATTACHMENTS AND ACCESSORIES

Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019, Phone: 1-877-282-8684

MTD Products Limited, Kitchener, ON  N2G 4J1, Phone:  1-800-668-1238

GDOC-100177 REV. B

Summary of Contents for 19B70054 Series

































Reviews: