Cub Cadet J466, Operator'S Manual

11

WARNING: Always wear the seat belt 
when operating the utility vehicle 
equipped with a OPS. However, if 
the OPS is not present or has been 
removed, the seat belt must not be 
used.

Adjustable Seat Lever

The adjustable seat lever is located beneath the driver’s 
seat on the front side and it is used to move the seat 
forward and backward. See Figure 3.
Slide the lever to the left and push the seat forward or 
back to the desired position. Release the lever so that it 
locks the seat in place.

WARNING:  Make sure seat is in 
locked position prior to operation and 
do not try to adjust the seat position 
while operating the vehicle.

Cargo Box Electric  

Lift Switch 

(Optional)

If equipped, the cargo box electric lift switch is located 

on the right side of the dash panel. It activates lift to raise 

and lower cargo box.

Rear Power Outlet Switch 

(Optional)

If equipped, the rear power outlet switch is located on the 
left side of the dash panel. It turns power on and off for 
the rear outlet.

Cargo Box 

The cargo box is raised by a gas spring. Manually remove 
the contents of the cargo box before lifting the cargo box. 
Pull up on the release latch located behind the driver’s 
seat and lift up the cargo box. Once the cargo box is in 
the raised position, access to the engine is possible. If 
equipped with a electrical lift, the cargo box can be raised 
to dump cargo. See Figure 4.

IMPORTANT: 

Do not exceed the vehicle’s Total Load 

Capacity of 1,300 lb., which includes driver, passenger, 
accessories, and cargo. Do not exceed 900 lbs. in the 
cargo box.

Figure 4

3

Know 

Your

Utility

Vehicle

Make sure seat is in 
locked position prior 
to operation and do 
not try to adjust the  
seat position while 
operating the vehicle.

IMPORTANT:

Do not exceed the 
vehicle’s Total Load 
Capacity of 1,300 lb., 
which includes driver, 
passenger, accesso-
ries, and cargo. Do not 
exceed 900 lb. in  
the cargo box.

WARNING