Cub Cadet S979, Operator'S Manual

19

777I20291

777S30118

777S30116

777I20067

777S30145 

777S30128

U NLES

S SIDE CHU

T E D EFLECTOR, MULC

H P L U

G O R

E N TIR

E G RASSC

A T C H E R IS IN IT'S PROP

E R P

L A C

E .

I F DAMAG

E D , R E P LACE IM MEDIAT

E L Y .

TO AVO

ID THE RISK O

F INJURY, NEVER OPER

ATE M

OWE

R

WARNING

AVOID SERIOUS INJURY OR DEATH
• KEEP HANDS AND FEET AWAY FROM 

    ROTATING  PARTS.
• REMOVE OBJECTS THAT CAN BE THROWN

   BY THE BLADE IN ANY DIRE CTION.
   WEAR SAFETY GLASSES.
• DO NOT MOW WHEN CHILDREN OR OTHERS 

   ARE AROUND.
• USE EXTRA CAUTION ON SLOPES. DO NOT MOW 

   SLOPES GREATER THAN 15˚. MOW ACROSS NEVER 

   UP AND DOWN. NEVER PULL MOWER CLOSE TO 

   YOUR FEET. LOOK DOWN AND BEHIND BEFORE 
   AND WHILE MOVING BACKWARDS.

READ OPERATOR'S MANUAL .  KEEP SAFETY DEVICES (BLADE CONTROL, TRAILING SHIELD, 
DISCHARGE COVER, ETC.) IN PLACE AND WORKING.  IF DAMAGED, REPLACE IMMEDIATELY.

TO REDUCE THE RISK OF INJURY, DO NOT
OPERATE UNLESS DISCHARGE COVER OR 
GRASS CATCHER IS IN ITS PROPER PLACE.
IF DAMAGED, REPLACE IMMEDIATELY.

SLOW

6 SPEED

POWER

PROPELLED

DRIVE

DISENGAGE DRIVE
WHEN CHANGING
S P E E D S .    S H I F T
O N LY   W I T H   T H E
ENGINE RUNNING.

TO ENGAGE

SQUEEZE DRIVE

LEVER TO HANDLE

TO DISENGAGE

RELEASE DRIVE LEVER

N

NEUTRAL

FORWARD

(MODEL PLATE ON RIGHT SIDE)

21"

CUT 

/ 6.75

HP

D06814

BLADE ROTATES WHEN SELF-STARTER IS ENERGIZED.
DE-ENERGIZE SELF-STARTER BEFORE SERVICING MOWER.

STARTER

BUTTON

WARNING

777S30567

TO START

Prime

Engine

1

Turn Key To 

Run Position

2

Push and Hold 

Starter Button

3

Pull Blade Control 

Bar to Handle

4

If Mower Does Not Start, Repeat
Steps 1-4 And Pull Rope To Start

FOR SERVICE & REPAIR

TO DE-ENERGIZE

STARTER

Push and Hold 

Starter Button

Remove Spark

Plug Wire

1

Turn Key To

Run Position

2

3

4

Release Blade Control Bar

5

5

Pull Blade Control 

Bar to Handle

777I20877

777O6814

Safety & Decorative Labels