CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
6.3.8
Manual number SSC10000AMM
Page: 8
Date: 10/28/2010
(6) REASSEMBLY
(a) Dust the inside of tire lightly with talcum powder.
(b) Place the tube (12) in the tire (10).
(c) Insert the wheel hubs (8) with the gasket (9) in between into the tire and tube
assembly. Make certain the gasket (9) is properly aligned with tube valve and
hub bolt holes.
(d) Insert 4 bolts and engage with 4 nuts. Torque to 80-100 in-lbs.
(e) Inflate the tire to 50 - 60 psi.
(f) Pack the bearings with grease (MIL-G-81322E
)
.
(g) Insert a bearing (4), inner spacer (3), grease retainer (2) and spacer (1) into the
each wheel hub.
(h) To install on the airplane, see Section 6.3.7.(8).
Summary of Contents for CARBON CUB SS CC11-160
