background image

13

Item

Abnormal 

Status

Possible 

Causes

Possible solution

power on

self - 

inspection

The indicator 

does not light 

up.

Damaged 

connector or 

poor contact

Re-plug  the  connector 

and check if the indicator 

can  light  up  or  not.  If 

it  still  does  not  light 

up, please contact the 

dealer

No sound.

Damaged 

connector or 

poor contact

Re-plug  the  connector 

and check if the buzzer 

can sound or not. If it still 

does not sound, contact 

your dealer

System

The indicator 
lights up 
continuously, 
and there is an 
audible alert

Radar 

abnormality

Contact your dealer

Functions

The indicator 

does not light up

It does not 

meet the 

warning 

requirement

Please ensure that the 

alarm has met the alarm 

condition. If there is no 

warning when the alarm 

condition is met, please 

contact the dealer

No second-level 

warning

No turn 

signals

Please connect the turn 

signals correctly

It does not 

meet the 

warning 

requirement

If there is no alarm when 

the warning requirement 

is met, please contact 

the dealer

The buzzer 

connector 

is damaged 

or there is a 

poor connect

Re-plug the connector 

to check if the buzzer 

can sound, or ensure If 

the warning requirement 

is met. If the buzzer still 

does not sound, contact 

your dealer

Other

When the engine 

stalls, the light 

on the Cigarette 

lighter plug is 

still on

Cigarette 

lighter 

supplies 

uninterrupted 

power

Press the button on the 

cigarette lighter plug 

to turn off the system 

or unplug the cigarette 

lighter plug, or please 

consult a professional 

technician to install this 

product changing to IGN 

power supply

Summary of Contents for VS-95A043

















Reviews: