background image

5

I N T E R FA C E   N O T E S

15 - 22 integrated warning leds (as well as backlit buttons) are present only 

on 

FORMULA-PRO 

spec wheels.

To use the POV switch (up, down, left, right) you are supposed to just gently 

move the joystick knob into the desired direction. If you feel the tactile 

“click”, you are also pressing the centre button (button 32).

Toggle switches and LEDs:

Button 15 and 22 have integrated warning leds: once the button has been 

pressed the respective led will start flashing. Once it has been pressed 

again the flashing stops. Useful for warning options, pit limiter etc.

Toggles 16 and 23 works in a similar fashion: once the toggle has been 

activated the respective led will turn on, when the toggle has been flipped 

off it turns the led off. In the ON status the respective button is not seen as 

always pressed, it only activate the button for a few ms when flipped on or 

off.

Toggles are useful for on/off features like headlights, wipers, ABS/TC etc.

Make sure the warning and toggle leds are synced correctly: e.g. if you 

activate one option without being in the sim, it will work in reverse once 

you are into the simulator. To fix this just pause the sim, turn off the toggle 

and unpause the simulator.

Summary of Contents for Formula

















Reviews: