13
Then, press the
ENT/Enter
button once to submit your counter value. The loader will now start
loading disc from the input Spindle and place them into all drive trays.
6.2 Editing Names
When you create either a new user or a partition, you need to assign a name to it. The example
shown here shows how to name or rename a partition, but the process for naming or renaming the
user name is identical.
During the process of creating a new partition, you will see the Edit Partition Name menu:
To enter the name, use the
Up
or
Down button
to select the character and use the
ENT/Enter
or
ESC/Escape
button to move the cursor position. Once you've finished, move the
cursor to “OK” and press the
ENT/Enter
button.
The name for a partition can be up to eight characters long, and the characters can be any alpha
(A...Z) or numeric (0...9) value. For example, if you want to name the partition for your master disc
as “FUN”. Then follow this example:
¾
Press
the
Down
button repeatedly until “F” is displayed. (You can also hold the
Down
button down, and the autoloader will scroll through the alphabet.)
¾
Press
the
ENT/Enter
button once to move the cursor to the next position.
¾
Press
the
Down
button repeatedly until “U” is displayed.
¾
Press
the
ENT/Enter
button once to move the cursor to the next position.
¾
Press
the
Down
button repeatedly until “N” is displayed.
¾
Press
the
ENT/Enter
button once to move the cursor to the next position.
¾
Once you have the name “FUN” displayed, press the
ENT/Enter
button repeatedly until
the cursor is moved to “OK”.
¾
Then press the
ENT/Enter
button once to submit your name selection.
You will now see the following confirmation screen:
Note:
After you submitted the Partition name, the system will automatically append a
suffix of .VEF. However, this does NOT apply for User Name input.
Press the
ENT/Enter
button to confirm.
Loading Partition?
[FUN.VEF], OK?
Edit Partition Name
[ ] OK?
