1
Chapter 1: Introduction
1. Overview
Welcome
The CUBE autoloader is a reliable, high performance, high speed, standalone, robotic CD, DVD
and/or Blu-Ray (Optional) autoloader. With its professional industrial design and simple user
interface, it makes your duplicating experience easier than ever.
With the CUBE autoloader, you have a capacity of 25 discs that can duplicate continuously for 24
hours, even with multiple masters. You get the highest quality duplication all at an extremely
affordable price. The CUBE is the most reliable and affordable autoloader on the market.
Before you start using this autoloader, please read the following to ensure proper operation:
BD/DVD Duplication Limitations
The autoloader will not copy any BD/DVDs that have Copy Protection encoded in the content.
Typically, most Blu-Ray movies or DVD movies you purchase or rent contain Copy Protection.
In addition to the copy protection limitation, the autoloader will only copy a single layer
Blu-Ray/DVD disc to another single layer Blu-Ray/DVD recordable media. If your autoloader has
double layer Blu-Ray/DVD capability, you can copy a double layer Blu-Ray/DVD disc to another
double layer Blu-Ray/DVD recordable media, but you cannot duplicate a single layer
Blu-Ray/DVD disc to double layer Blu-Ray/DVD recordable media or vice versa.
Temperature Warning
If the autoloader was stored in a location where the temperature dropped below 32° F (0° C)
within the past 24 hours, leave the autoloader in a warm room with temperatures at least 65° F
(19° C) for four hours prior to powering it on for the first time. Failure to do so may cause
irreparable harm and prevent the autoloader from functioning.
Maintenance
It is very important to operate and keep the autoloader in a dust free, clean environment since
dust is the number one killer of CD/DVD/Blu-Ray recording devices. Failure to do so can severely
damage your autoloader. We strongly suggest that you constantly use an Air Duster (Canned Air)
to clear off any dust on the surface of the autoloader.
Note:
Do not try to use an Air Duster to clean the autoloader while the writer trays are open. In
doing so, you may inadvertently blow dust into the recording device and damage it.
Proper Shutdown
To avoid possible system failures, you need to shut down the autoloader properly. To shut down
the autoloader, scroll to menu 16. Shutdown and follow the instructions on the screen. Not
performing this function increases the risk of damaging the autoloader.
