Operation
Cubing and Weighing
CubiScan 125
28
3. Tap
[Measure]
. The length, width, height, and weight of the package are
displayed.
A two-dimensional image of the object is displayed. The length, width,
height, and weight are displayed on the touchscreen.
4. Remove the package from the platform. Wait for the
zero
indicator to
light before placing the next object on the platform.
If the
zero
indicator does not light, it means that the CubiScan 125
needs to be zeroed. To zero the scale, make sure that the platform is free
of all objects, then tap
[Zero]
.
Measuring/
Weighing Items
Using the Gate
Take the following steps to measure and weigh an item using the
touchscreen. The measuring gate can measure opaque objects as small as .1
inch (2 mm). An image of the object is displayed on the touchscreen as it is
measured. When you begin measuring with the measuring gate, you must
start with the gate on the right side of the CubiScan 125, or home position
(indicated by the
home
indicator on the touchscreen).
You can then use either of the following two methods to measure an object.
•
Place the item anywhere on the glass platform. Starting with the
measuring gate on the right or left side, move the gate over the object,
and then move it back to the position you started in to complete the
measurement.
•
Place the item anywhere on the glass platform. Start with the gate on the
right or left side and then move it to the opposite side you started in to
complete the measurement.
Figure 23
Ultrasound Measurement Display
