12
Cleaning the Product
1
Inner pot
Do not use a coarse scrubbier, metallic scrubber,
brush, abrasive, etc. As the coating on inner and outer
parts of the inner pot may be peeled off, use a kitchen
detergent with soft cloths or a sponge to clean it.
Especially, do not wipe the inner pot using
abrasives, tooth paste or other brightener to
brighten its surface. Discoloration may occur,
or the coating may peel off.
2
Water tray
Separate the water tray and clean it thoroughly.
Clean the separated water tray with a mild dish
detergent and a sponge.
3
Inside the main body
Remove the inner pot and remove foreign matters
on the bottom before use. If foreign substances
are present at the auto temperature sensor or
the hot plate, the sensor may be unable to detect
temperature, preventing proper rice cooking or
causing malfunction or fire. Wipe it with a well
wrung-out dish towel and be careful not to damage
the infrared temperature sensor (IR sensor).
Do not touch or clean the inner parts of the main
body right after cooking or warming.
There is a danger of burns.
4
Steam cap
Turn it in the OPEN direction and pull it forward to
separate it.
Clean the inside thoroughly. Align the part and
part (3 places) based on the direction of the
arrow and the 'A' protrusion, and assemble it by
turning it in the CLOSE direction.
5
Accessories
Clean the accessories, dry them well, and keep them properly.
Caution
• Unplug the product before cleaning it. Do not sprinkle water on it or wipe it with benzene, thinner, etc.
• If you do not thoroughly clean the product, there may be odors during warming.
Taking Care of the Product
CJE-CD061 SerCHS+KOR.indb 12
CJE-CD061 SerCHS+KOR.indb 12
2022-02-14 �� 12:46:09
2022-02-14 �� 12:46:09
