11
Details to Check Before Use
Place the filter cover back on the air purifier.
▶
When re-assembling the filter cover, be careful of jamming a body part or an
object. It may cause an injury and/or product malfunction.
▶
Position the cover and push in until you hear clicking sound to lock it in place.
AC 120V
❸
Details to Check Before Use
Open the filter cover.
▶
Please open the filter cover from the left upper section.
※
Do not forcefully open by pulling the lower section of the cover.
Doing so may damage the product.
Caution
Caution: When not using this product for an extended period of time, pull out the Power Plug.This product is
exclusively for 120V~, 60Hz. Put the Power Plug in the appropriate Power Outlet.
Take out the filter and remove the
vinyl wrapping.
▶
After removing the packaging vinyl,
please insert the filter inside the purifier.
▶
Please make sure the filter is inserted
properly with the upper part facing up.
❷
❶
Connect to a power supply.
▶
This product is exclusively for 120V~. Please connect the product to
the appropriate Power Outlet.
Press the ON/OFF button to turn ON the power. Then, use the
Mode button to set the desired operation mode. .
※
Be sure to insert the filter prior to using the air purifier.
Use the ON/OFF button to stop operation.
▶
If operation is in progress, the fan will run for 10 seconds then stop.
▶
All the indicators on the Display Panel will turn OFF.
❹
❺
❻
